{"id":236,"date":"2012-06-04T13:04:15","date_gmt":"2012-06-04T21:04:15","guid":{"rendered":"http:\/\/www.plasma2002.com\/blog\/?p=236"},"modified":"2016-07-28T10:11:41","modified_gmt":"2016-07-28T18:11:41","slug":"lazor-blades","status":"publish","type":"post","link":"https:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/","title":{"rendered":"Lazor Blades"},"content":{"rendered":"<p>It&#8217;s usually a pleasure to work with my laser cutter, but as with most things, there are a couple annoyances here and there. One thing is the honeycomb table that came with the cutter.<\/p>\n<p>While it does a great job at holding up a work piece, and usually keeps from marring the material, its giant borders can get in the way pretty often. If I try to cut anything while it is resting on the border, on the underside of the material, it will get way too hot and end up melting or burning the piece.<\/p>\n<p>Since I couldn&#8217;t move the borders any further, I decided that I needed a different solution for holding up a work piece, while still having a small enough footprint on the piece to let the laser beam go over it without marring the material.<\/p>\n<p>In the industry, there are basically only a couple standard ways to do this; honeycomb tables, and knife edge tables. I didn&#8217;t exactly want to lay down the money to buy a knife table, but figured I could instead make my own with some simple razor blades. This is the result.<\/p>\n<p><a href=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-238\" title=\"Photo_5\" src=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg\" alt=\"\" width=\"717\" height=\"960\" srcset=\"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg 717w, https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5-224x300.jpg 224w\" sizes=\"auto, (max-width: 717px) 100vw, 717px\" \/><\/a><\/p>\n<p>&nbsp;<\/p>\n<p>These little guys are perfect for me for a few reasons. For one thing, they are movable. I can place them under any part of a work piece, without having to worry about it being in the way.<\/p>\n<p>The actual Lazor Blades (the wooden holders) are set about half an inch below the work surface, so that means by the time the laser beam hits them, it is unfocussed and will not totally cut through them. As you can see in the photo below, they do, in fact, get marred by the laser. I was expecting this to happen, and for that reason, I pretty much classify these as a dispensable consumable. Whenever the ones I have get used up, I just cut some more. It works out pretty nice \ud83d\ude42<\/p>\n<p>If you want some Lazor Blades of your own, make sure to <a href=\"http:\/\/www.thingiverse.com\/thing:23592\" target=\"_blank\">grab the file from Thingiverse<\/a> and cut some out!<\/p>\n<p><a href=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_7.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-240\" title=\"Photo_7\" src=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_7.jpg\" alt=\"\" width=\"717\" height=\"960\" srcset=\"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_7.jpg 717w, https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_7-224x300.jpg 224w\" sizes=\"auto, (max-width: 717px) 100vw, 717px\" \/><\/a><\/p>\n<p>&nbsp;<\/p>\n<p><a href=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_6.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-239\" title=\"Photo_6\" src=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_6.jpg\" alt=\"\" width=\"717\" height=\"960\" srcset=\"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_6.jpg 717w, https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_6-224x300.jpg 224w\" sizes=\"auto, (max-width: 717px) 100vw, 717px\" \/><\/a><a href=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_2.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-237\" title=\"Photo_2\" src=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_2.jpg\" alt=\"\" width=\"717\" height=\"960\" srcset=\"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_2.jpg 717w, https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_2-224x300.jpg 224w\" sizes=\"auto, (max-width: 717px) 100vw, 717px\" \/><\/a><\/p>\n<p>PS: They&#8217;re great for all kinds of things, not just lasers! For example, spray painting, as seen above<\/p>\n","protected":false},"excerpt":{"rendered":"<p>It&#8217;s usually a pleasure to work with my laser cutter, but as with most things, there are a couple annoyances here and there. One thing is the honeycomb table that came with the cutter. While it does a great job at holding up a work piece, and usually keeps from marring the material, its giant [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[18,37,16],"tags":[],"class_list":["post-236","post","type-post","status-publish","format-standard","hentry","category-laser","category-portfolio","category-projects"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v24.2 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Lazor Blades - Plasma2002<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Lazor Blades - Plasma2002\" \/>\n<meta property=\"og:description\" content=\"It&#8217;s usually a pleasure to work with my laser cutter, but as with most things, there are a couple annoyances here and there. One thing is the honeycomb table that came with the cutter. While it does a great job at holding up a work piece, and usually keeps from marring the material, its giant [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/\" \/>\n<meta property=\"og:site_name\" content=\"Plasma2002\" \/>\n<meta property=\"article:publisher\" content=\"http:\/\/facebook.com\/plasma2002\" \/>\n<meta property=\"article:published_time\" content=\"2012-06-04T21:04:15+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2016-07-28T18:11:41+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg\" \/>\n<meta name=\"author\" content=\"Plasma2002\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Plasma2002\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/\",\"url\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/\",\"name\":\"Lazor Blades - Plasma2002\",\"isPartOf\":{\"@id\":\"http:\/\/www.plasma2002.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#primaryimage\"},\"image\":{\"@id\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#primaryimage\"},\"thumbnailUrl\":\"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg\",\"datePublished\":\"2012-06-04T21:04:15+00:00\",\"dateModified\":\"2016-07-28T18:11:41+00:00\",\"author\":{\"@id\":\"http:\/\/www.plasma2002.com\/blog\/#\/schema\/person\/a99fb575da6efea98db3e249b5e3f108\"},\"breadcrumb\":{\"@id\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#primaryimage\",\"url\":\"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg\",\"contentUrl\":\"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg\",\"width\":\"717\",\"height\":\"960\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"http:\/\/www.plasma2002.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lazor Blades\"}]},{\"@type\":\"WebSite\",\"@id\":\"http:\/\/www.plasma2002.com\/blog\/#website\",\"url\":\"http:\/\/www.plasma2002.com\/blog\/\",\"name\":\"Plasma2002\",\"description\":\"Ramblings from the Fourth State of Matter\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"http:\/\/www.plasma2002.com\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"http:\/\/www.plasma2002.com\/blog\/#\/schema\/person\/a99fb575da6efea98db3e249b5e3f108\",\"name\":\"Plasma2002\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"http:\/\/www.plasma2002.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/cd4c32edd53cd00dd0feaf6d7abe80e169471f3c114539d040001015979afb5a?s=96&d=retro&r=r\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/cd4c32edd53cd00dd0feaf6d7abe80e169471f3c114539d040001015979afb5a?s=96&d=retro&r=r\",\"caption\":\"Plasma2002\"},\"description\":\"For my bio, please see http:\/\/www.plasma2002.com\/about\",\"sameAs\":[\"http:\/\/www.plasma2002.com\"],\"url\":\"https:\/\/www.plasma2002.com\/blog\/author\/plasma2002\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Lazor Blades - Plasma2002","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/","og_locale":"en_US","og_type":"article","og_title":"Lazor Blades - Plasma2002","og_description":"It&#8217;s usually a pleasure to work with my laser cutter, but as with most things, there are a couple annoyances here and there. One thing is the honeycomb table that came with the cutter. While it does a great job at holding up a work piece, and usually keeps from marring the material, its giant [&hellip;]","og_url":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/","og_site_name":"Plasma2002","article_publisher":"http:\/\/facebook.com\/plasma2002","article_published_time":"2012-06-04T21:04:15+00:00","article_modified_time":"2016-07-28T18:11:41+00:00","og_image":[{"url":"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg","type":"","width":"","height":""}],"author":"Plasma2002","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Plasma2002","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/","url":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/","name":"Lazor Blades - Plasma2002","isPartOf":{"@id":"http:\/\/www.plasma2002.com\/blog\/#website"},"primaryImageOfPage":{"@id":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#primaryimage"},"image":{"@id":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#primaryimage"},"thumbnailUrl":"http:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg","datePublished":"2012-06-04T21:04:15+00:00","dateModified":"2016-07-28T18:11:41+00:00","author":{"@id":"http:\/\/www.plasma2002.com\/blog\/#\/schema\/person\/a99fb575da6efea98db3e249b5e3f108"},"breadcrumb":{"@id":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#primaryimage","url":"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg","contentUrl":"https:\/\/www.plasma2002.com\/blog\/wp-content\/uploads\/2012\/06\/Photo_5.jpg","width":"717","height":"960"},{"@type":"BreadcrumbList","@id":"http:\/\/www.plasma2002.com\/blog\/2012\/06\/04\/lazor-blades\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"http:\/\/www.plasma2002.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Lazor Blades"}]},{"@type":"WebSite","@id":"http:\/\/www.plasma2002.com\/blog\/#website","url":"http:\/\/www.plasma2002.com\/blog\/","name":"Plasma2002","description":"Ramblings from the Fourth State of Matter","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"http:\/\/www.plasma2002.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"http:\/\/www.plasma2002.com\/blog\/#\/schema\/person\/a99fb575da6efea98db3e249b5e3f108","name":"Plasma2002","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"http:\/\/www.plasma2002.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/cd4c32edd53cd00dd0feaf6d7abe80e169471f3c114539d040001015979afb5a?s=96&d=retro&r=r","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/cd4c32edd53cd00dd0feaf6d7abe80e169471f3c114539d040001015979afb5a?s=96&d=retro&r=r","caption":"Plasma2002"},"description":"For my bio, please see http:\/\/www.plasma2002.com\/about","sameAs":["http:\/\/www.plasma2002.com"],"url":"https:\/\/www.plasma2002.com\/blog\/author\/plasma2002\/"}]}},"_links":{"self":[{"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/posts\/236","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/comments?post=236"}],"version-history":[{"count":10,"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/posts\/236\/revisions"}],"predecessor-version":[{"id":250,"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/posts\/236\/revisions\/250"}],"wp:attachment":[{"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/media?parent=236"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/categories?post=236"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.plasma2002.com\/blog\/wp-json\/wp\/v2\/tags?post=236"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}